- GXF light closed suspension chain series
- GXt Metric Imperial Suspension Mold Forged Chain Series
- GDFS ground wheel cross chain series
- GWJ Light Suspension Chain
- GDT heavy duty ground forging chain series
- GWJ Light Suspension Chain
- GWJXF Cross Chain Suspension Chain
- GDPF ground three - chain chain series
- GDC cross vertical chain series
- GXFJ light suspension opening up chain series
- GXFS Cross Suspension Chain Series
- GWJ heavy duty hanging chain series
- GDF light ground chain series
- Taiwan five tons of light closed suspension chain series
Coating costs; Amike powder coating is sprayed through the electrostatic powder on the surface of the bottle, and scattered part of the recovery through the powder recycling equipment, the utilization rate can reach more than 98%, to solve the traditional liquid paint spray waste and cause Environmental pollution problems.
2. Environmental protection materials, food safety assurance
Products are mainly used in nano-technology, combined with the principle of physical static powder will be evenly adsorbed on the surface of the workpiece, after high temperature baking powder coating with the workpiece surface of the perfect chemical adhesive reaction to solidify on its surface. As the glass powder coating solvent-free, so it belongs to a new type of environmentally friendly non-polluting green products, through ROHS certification, REACH regulations and FDA food grade certification. All kinds of synthetic materials completely environmentally friendly non-toxic, no harm to the environment to meet environmental standards, synthetic materials on the human body without any side effects, no residue, to meet the requirements of food safety. The production process of basic zero emissions, eliminating the occupational hazards of workers, greatly improving the working environment of workers.
3. Product shape perfect, comparable with porcelain
Powder coating of the workpiece surface hardness, gloss and fullness are higher than the traditional paint, and the color is more beautiful, comparable with porcelain, you can complete the traditional oily oily coating can not show the effect, such as mirror surface, ceramic surface effect, Surface effect, orange pattern, moire and other effects. Its surface effect than the traditional paint to enhance a grade.
Paint spray every time you need to color, it is difficult to ensure that each batch of spray color consistent. Powder coating does not require color, with a formula, spray the results are almost the same, you can directly on-line use, reducing the product quality of the unstable factors.
Powder in the storage process without paint separation phenomenon, to ensure uniformity of spray quality
Powder spray can achieve the desired film thickness, there will be no sag and other bad
Powder corner coverage is good, the workpiece surface does not leave dead;
All the basic paint properties of the powder can be done, but a lot of powder performance paint is difficult to achieve.
4. Production costs are reduced by more than 30% compared to traditional paints
A, a spray to achieve the perfect effect
Paint spray sometimes need to first spray through the bottom, the line by the second spray to achieve the desired effect, and powder coating only need a spray can achieve the perfect effect, spray efficiency to engage in high, a coating thickness can reach 30 - 300UM , All products through a one-time spray to fully meet and more than twice the effect of paint spraying. Compared with the paint, the production efficiency increased by at least 50%.
B, one up and down the completion of the assembly line operation:
The traditional paint spray line need to first clean and then spray, wash a line, spray a line, the production process, cleaning and spraying must be completed once the bottle under the bottle action, low labor efficiency. With the product of the automated assembly line, cleaning and spraying once completed, reducing the bottle and the next bottle of the link, greatly improving the work efficiency.
C, high recovery rate
As the spraying process is equipped with powder recovery box will not be adsorbed powder completely recovered, so the powder utilization rate of up to 98% or more. Therefore, the cost of materials for each workpiece, only the cost of materials can save more than 20%.
D, management and maintenance costs
Paint spray is often easy to cause fire hazards, flammable and explosive substances are more likely to cause huge economic losses to the factory, without flammable and explosive substances, powder spray no fire hazards. At the same time because of no emissions, but also reduce the cost of wastewater treatment. At the same time the traditional paint for color cleaning equipment need to wash, time-consuming, powder spray cleaning is simple, time-consuming.
Above comprehensive consideration. The production cost of the powder material saves at least 30% of the production cost compared to the paint spray.